¡Hola y bienvenido a OpenStreetMap!
Supongo que el nombre de way/1385843234 no es realmente ddcm8733_inun, y en las imágenes parece un edificio rectangular, pero no se ha dibujado como tal. Puedes cuadrar las esquinas de los edificios presionando "q" en el editor del navegador.
Veo que estás en conversación con todos en https://community.openstreetmap.org/t/saludos-necesito-ayuda-he-iniciado-un-mapeo-colaborativo-en-guayas-ecuador/130079, y también que hay muchos detalles por pulir antes de poder volver a editar, así que espera a que eso suceda. Si tiene alguna pregunta, por favor, hágala en el foro https://community.openstreetmap.org/t/saludos-necesito-ayuda-he-iniciado-un-mapeo-colaborativo-en-guayas-ecuador/130079.
Atentamente,
Andy

Hello and welcome to OpenStreetMap!
I'm guessing that the name of way/1385843234 isn't really ddcm8733_inun , and it also looks from the imagery like it is a rectangular building, but it has not been drawn as one. You can square the corners of buildings by pressing "q" in the in-browser editor.
I can see that you're in discussion with everyone at https://community.openstreetmap.org/t/saludos-necesito-ayuda-he-iniciado-un-mapeo-colaborativo-en-guayas-ecuador/130079 , and also that quite a lot will need to be tidied up before you can start editing again, so please do wait for that to happen.
If you have any questions, please ask them in the forum https://community.openstreetmap.org/t/saludos-necesito-ayuda-he-iniciado-un-mapeo-colaborativo-en-guayas-ecuador/130079 .
Best Regards,
Andy

No idea, I've never been there - I just added the underscore!

For info, two accounts were working together here. I've reverted the other one in changeset/166163077 and have forced through the remaining reverts in changeset/166163147

ts1877a and ts1878b.
Around Yorkshire Green construction site.

relation/5848094/history has been a "place=locality" since basically forever, but I don't think that that is correct, is it?

Also - if you have changed any other examples in this way those will be wrong too. Please investigate each one and correct if necessary. There were 10 a couple of weeks ago: https://overpass-turbo.eu/s/23Ty .

This clearly isn't correct. "Just Tyres" sells (as the name implies) "Just Tyres".
You can see what the other shops are by using overpass: https://overpass-turbo.eu/s/23Tx . "shop=tyres" seems to be the favourite, so I'll set this one to that.

Somewhat confusingly, the service road way/733298699 was part of the Clwydian Hills relation relation/10757713 and extending it meant that that boundary was no longer a valid polygon. I've cut it in too and removed the end part from the relation in changeset/166101884; the boundary should reappar now.

Thanks!
I spotted this again a couple of days ago and completely forgot that I'd commented on changeset/156022134 7 months ago but never got around to fixing it.

I'm slowly working through these and actually removing the Google-sourced IP.

Hello,
What is the source of the name "Rockingstone Moss Interchange"? I've used it many times, and have never seen this sign. The only examples I can find are basically fantasy (SABRE) or pages that use OSM as a source.
Best Regards,
Andy

Hello,
Are you sure that the "naptan:AtcoCode" on node/5784071207/history is correct? This appears to be in the museum; I'm guessing the code is for Didcot Parkway node/6605149662 .
Best Regards,
Andy

I suspect that way/521292120/history is not any sort of storage tank - by the name and the location I suspect it is a filter bed in a sewage works.

Please use sensible changeset comments that explain what you have actually done, especially when doing reverts.

To be clear - if you're performing automated tag changes (e.g. from "landuse=something" to some other tag) without any other investigation) then that's an automated edit and needs to be discussed.
If you're changing "highway=pirmary" to "highway=primary" than that's just fixing an obvious typo and doesn't.
If you're looking at the "suggestions" from iD or Rapid, some will be in the former category and some in the latter. You as a mapper make the decision to make the change - if you are just "trusting the tool" and not reviewing suggestions then it IS an automated edit and MUST be discussed.

This one had `landuse=conservation` (which is relatively rarely used, but see landuse=conservation ) - that sometimes means "there is something else going on, beyond just being a nature reserve", or it might be "it's a tag left over from 15 years ago and doesn't add any other value". You've added `blundary=protected_area` but without any protection information; without extra tags (see boundary=protected%20area?uselang=en-GB ) that is basically uncomsumable.

With regard to "random outdated tags in RapId" if you are performing what is essentially an automated edit (whatever tool you are using) then you must follow osm.wiki/Automated_Edits_code_of_conduct and discuss - the UK forum https://community.openstreetmap.org/c/communities/uk/86 would be a great place to discuss. Some of the changes suggested by iD / Rapid are sensible; some are questionable and some are utter garbage.
Best Regards,
Andy

Hello Numbergod,
Is was wondering what the changes to way/103827772 were here? The changeset comment is just "Fixed various issues"; what actually was the change here?
Best Regards,
Andy

A web search right now (Google or DDG) only finds (a) OSM (b) SABRE and (c) other user-contributed data such as "Litter on slip road verge. Ducker Holt Interchange, Marr, Doncaster, South Yorkshire, England, DN5 7AS, United Kingdom".

Here's the diary entry:
@SomeoneElse/diary/397310

when one changes a cron job on the server that has the database for https://map.atownsend.org.uk/maps/map/map.html sends me an email if relations might have a new gap, like

Change in relation components for Capital_Ring_Section_10 6473820
3c3
< 1
---
> 2
relation/6473820
http://ra.osmsurround.org/analyzeRelation?relationId=6473820
http://ra.osmsurround.org/analyzeMap?relationId=6473820

Hope this helps!