Hi Cass0902. Thanks for making corrections! Don't map the roof peaks, you should be mapping the footprint of the building. Think what the base of the building would look like without the building structure.
Quick tip, pressing the 'Q' key when you have a building selected will sQuare the corners on a rectangular building. Makes it more accurate, and looks better.

Moving buildings is correct, but you have to make sure the imagery is correctly aligned first. see: osm.wiki/Using_Imagery

in your area it looks like mapbox imagery is better and better aligned than bing (but imagery gets better over time). So, you have additional work to do. Check road intersections and make sure the imagery is correctly aligned there first before adjusting the buildings. Have fun!

Welcome to OSM Mike! Quick tip, if you press the 'Q' key, it will sQuare the building you have selected. You straightened the side of the school, but the building is not squared. Keep mapping!

Welcome to OSM PsuStudent! Instead of making that an area, maybe extend the building (since it is part of the building). Then it doesn't need a name. Also, showing the route to use that window may be more helpful. It seems like an odd location. Keep mapping!

Welcome to OSM Cass0902! You added some great information about the house, but the outline should be sized to be the exact base of the building. I changed it and one other as an example. Can you change the others? Keep mapping!

HI Jocelyne, welcome to OSM!
Thanks for the additions. I made a few corrections. OSM doesn't use abbreviations, like S for South or Rd for Road, so I expanded them. Time is also on a 24 hour clock, so I changed 4pm to 16:00.

If you have any questions, just ask.
Keep on mapping!

hi yadathot. I noticed several conditional relations you created in the philadelphia area. They are in the form relation=no_left_turn @ (Mo-Fr 16:00-18:00)

That seems to show an error in josm.
According to the wiki: osm.wiki/Conditional_restrictions

It seems the correct way should be in the form:
relation:conditional=no_left_turn @ Mo-Fr 16:00-18:00

Can you investigate and correct?
I have also sent an email to amazon escalation.

Hi Kyle, welcome to OSM! I think Mapbox imagery is clearer in your area. Also, try and make the building outlines more accurate. When a building is selected, pressing 'Q' key will square the corners on the building. They look much neater too! If you have any questions, just ask. Or if you want there is a Discord and also a Slack with lots of helpful people.

This landuse was done better, but still has two issues. The west side seems to be missing some houses that should be part of the area. When creating area, try to not glue the landuse to roads. Makes moving either of them easier without impacting the other. In id, you can hold the Alt key when you mouse click to avoid the 'snapping' of things together.
Have fun, and keep mapping!

Hi AbridgedPause, welcome to OSM! You added the residential to a relation, but it shouldn't be part of it.

can you check the imagery you are using? looks like mapbox is more accurate in this area. Or at least align the imagery you use. Please correct.

jrisv250, there are 4 pickleball courts here, not two. Can you correct?

hi mblumber. several of the sidewalks you added around Flemington have a layer=1 or -1, but they shouldn't. If you are getting errors like building crossing highway, then you should place the building correctly.
---

Published using OSMCha: https://osmcha.org/changesets/108261593

Welcome to OSM EY03! Great comment on the change. The outline of the house needs to be tighter though. I made the house outline more exact, and added a few other houses on the street. Take a look, ask if you have any q's, and keep mapping!

hi MauiMacMan, welcome to osm. Looks like you accidently dragged a node. Can you look at it and correct it?

hi convissor. why are you removing marked crossings and tactile_paving on corners? The footway was adjusted to through a barrier, maybe the barrier needs adjusting too.

footways are glued to buildings and at layer=-1, but should not be. Maybe covered=yes in some spots.

no worries. updated this and 18w too.

layer -1 would mean the toll booth is below the road. layer 1 on the barrier would mean over.
or maybe soon they'll all go away and they'll bill by mail.

removed the layer on the building since it is on the ground and changed the coved road to the section that is covered.