Method I was using for reference - osm.wiki/Strava#Global_Heatmap_in_High_Resolution
I've used this for the A, B, and C trails now

Method I was using for reference - osm.wiki/Strava#Global_Heatmap_in_High_Resolution
Since this is allowed for tracing, I'm planning to do this for the other Harwood trails

Method I was using for reference - osm.wiki/Strava#Global_Heatmap_in_High_Resolution
Since this is allowed for tracing, I'm planning to do this for the other Harwood trails

Meant to comment that on the change I made to this, but that's how I went about updating the path

Method I was using for reference - osm.wiki/Strava#Global_Heatmap_in_High_Resolution
Since this is allowed for tracing, I'm planning to check the remaining Pandapas trails for any discrepencies.

Method I was using for reference - osm.wiki/Strava#Global_Heatmap_in_High_Resolution
Since this is allowed for tracing, I'm planning to check the remaining Pandapas trails for any discrepencies.

Method I was using for reference - osm.wiki/Strava#Global_Heatmap_in_High_Resolution
Since this is allowed for tracing, I'm planning to check the remaining Pandapas trails for any discrepencies.

Method I was using for reference - osm.wiki/Strava#Global_Heatmap_in_High_Resolution
Since this is allowed for tracing, I'm planning to check the remaining Pandapas trails for any discrepencies.

Description got cut off, so here is the rest of it: Since this is a multi-use trail with signage for foot, bicycle, and horse, it doesn't make sense for only horse to be designated

I noticed when adding the Black Trail (and connecting the Climbing Trail to Gateway) that there were a lot of pre-existing warnings about gateway and the stream it crosses multiple times. I didn't make any changes because my changes weren't related to Gateway and I wasn't sure what the correct solution would be, as I think the majority of the stream is underground.
Just wanted to point this out if anyone wants to fix the warnings on Gateway.

Thanks, just updated it as part of changeset #130520290

There may be bollards on this path, I can't remember

I wasn't really sure what type of road this should be classed as. It seems like the neighborhood was built with it being a residential road (part of Hawser Bend), but then they decided to block it off with bollards and turn it into a connecting path for foot/bike. So, I wasn't sure if it should still be classed as a residential road even though cars aren't allowed on it, or changed to path, even though it is much wider than a normal paved path.

Should it be bicycle=yes rather than designated? It's a marked bike & pedestrian crossing with a signal at that traffic circle. I think I had added bike designated to match the foot designated that was already there. (The overall changeset was to fix paths/crossings that were marked as no bicycles)

Note - The Orion Township offices still don't show up in the satellite imagery, so I haven't added the buildings, parking lot yet.

*West Bald Mountain, not East

Hi! I noticed you added some trails within Bald Mountain (north of Scripps Road) as part of this changeset. I went out and looked at the trails earlier today since it was the first I'd heard of them and found several other side trails that probably should be added as well. I could add them myself or provide a GPS trace if you want to take a look. Also, do you know if there are any "official" maps showing all of the trails here, or did you just make them from personal knowledge? I'm interested because there doesn't really seem to be any information online about the "East Bald Mountain" trails, just the North and South trails.

There are other missing trails as can be seen on the trail map here: https://wvstateparks.com/wp-content/uploads/2017/03/PipestemResortStatePark_brochure_map-1.pdf

The River Trail & County Line Trails are the only ones I had a GPS trace for though.

I'm not sure if the part of the neighborhood with Berwick and Kirksway Lanes is gated or not (and it might acutally be a separate community that's just connected with a trail). For the moment I'm not marking those roads as private until I have a chance to go over and look.

First ever OSM change. I did my best to match the properties to the adjacent road/path segments that showed as "correct" with regards to bike routing on Strava. Please let me know if there are any issues with my changes.