Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178910533

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178901415

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178906775

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178883229

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178883832

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178884462

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178502738

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178774237

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178752328

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178657469

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178587590

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178525240

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178448048

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178448028

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178409951

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/178409951

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178225988

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178226702

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178188451

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/178351554