原先此段水體無法在Carto上正常繪製，但是在MapTiler OMT和OsmAnd都可以，疑惑了好幾天
重新編輯時才發現是因為外框路徑有self-intersection導致，已於此變更集修正

感謝S大，已經更正！

民生東西路也無實體分隔島，之後有空時再修正

謝謝您的提醒～
您是真細心，我看新聞完全都沒提到這件事，看到您畫的線形以為是舊的規劃，就先刪除了，沒想到是新的......
也再次和您道歉，真的沒看到您的地圖註記就先修改了

Source: https://sec.ntu.edu.tw/001/Upload/18/relfile/10344/205651/4cd16f58-267d-4683-9441-20c4cefc5e3d.pdf

Hi! Thank you for your contribution, but I think the nodes of the roads were moved by mistake. I will revert this changeset!

Hi. I noticed every shape you drew has a name "#EatonMissingMaps" on it. Out of curiosity, what does it mean?

Hi, thank you for your contribution!
However, please be mindful for your submission, as you have merged three nodes in route "明禮路" with your buildings together, creating non-existent sharp turns stretching hundreds of meters.
iD editor is hard to use sometimes, so please be sure to double check!

Thank you for your contribution. However, please be mindful when you submit your changeset! You moved one node 305 meters away and disrupted all the normal paths.
Your changeset will be reverted.

Reference: 台北市政府簡報
https://www-ws.gov.taipei/Download.ashx?u=LzAwMS9VcGxvYWQvMzYzL3JlbGZpbGUvNDU1MDUvODIyOTU1Ni81MzFhNDVjYi0zOTVmLTRmMTEtOGU3MS0yYWUzOTc2YjA1NzMucGRm&n=QTA0LnBkZg%3d%3d&icon=..pdf

最近在編輯市府周邊區域，發現基隆路地下道這段繪製後因道路過寬而重疊，難以直接閱讀，所以試著在遵守標籤規則及導航規則的情況下編輯這段的線型，希望能更容易閱讀～

Hi. Thank you for your contribution! However, your edit was incorrect as it is not what's on the ground and I have therefore reverted it.

資料來源：https://www.v523.tw/upload/fileUrl/2016-09/29/5c2dd9c9-c597-41e3-9a77-f154c89ac9cc.pdf
《變更新店都市計畫（第三次通盤檢討）書》p. 2-23

來源：〈國立臺灣大學水源校區整體規劃報告書〉，2009/12/21
https://homepage.ntu.edu.tw/~cpo/plan/shuiyuang.pdf

謝謝提醒！有時候會忘記，疏忽了，會小心一點XD

Hey mom I was here!

您好，會選擇刪除重畫是因為我想將物件輪廓形狀畫的精準一點，例如直角、圓弧等都想盡量對正。
但我對JOSM不太熟悉，操作上好像沒有其他向量繪圖軟體常見的功能（例如多邊形可以相加，但不能相減？），導致要將既有形狀修正，比起刪除重畫來說麻煩很多，所以才會如此操作。

您好，謝謝您的指教！
當初用點是想說這樣比較接近醫院的入口，對於直接用預設osm-carto來看的人會比較友善（因為entrance=main遠比amenity=hospital來的不起眼），不過後來還是改回圈出來加amenity的做法了。
最近還在學習編輯OSM，前輩還有建議的話也請不吝指教！謝謝您！