Hello. Thanks for mapping.
* Buildings should be mapped without snapping their corners to other buildings and features such as roads and paths.
Keep that in mind on future mappings please.

Hello. Thanks for mapping.
PLease don't forget to square each rectangular building.
Don't you use the building plugin ?
When you map with that plugin, it delivers fair, squared corners !
Check this wiki.
osm.wiki/JOSM/Plugins/BuildingsTools
Best regards

Hi. another issue. You forgot often to square a building with the Q key while the object is still selected.
Best regards

Hello. Thanks for mapping.
We welcome you as a new mapper.
You mapped quite a few buildings over already mapped buildings and added layer = 1. Why? They are not above ground level. Mostly added to hide errors.
Just adjust the mapping so that it is not touching or overlapping another building.
Quality prevails above quantiy !!

Best regards

Hello. Thanks for mapping.
Please map buildings just as building=yes.
From a satellite image, we cannot see what the purpose is of a building.
Please square each building you map with the Q key while selected.
Don't connect buildings to each other.

A remark. This kind of task is, in our opinion, not to be mapped by new mappers. Try a somewhat easier task.
Best regards

Adjusted bad mappings

Hello. A remark about your work here.
Your mappings are far below par.

Sloppily mapped, clusters were created and made as one building. Oversized, including the shadow of a building. You are creating a lot of work for fellow mappers and validators because your work needs to be corrected.

Take a look at this web page, where a number of buildings have been adjusted to reflect the actual situation.

I am going to remove the worst mappings. They have to be mapped from scratch.

https://overpass-api.de/achavi/?changeset=176664808
Best regards

Vos mappages sont bien en dessous de la moyenne.
Ils sont mal faits, avec des clusters créés et représentés comme un seul bâtiment. Ils sont surdimensionnés, y compris l'ombre d'un bâtiment. Vous donnez beaucoup de travail à vos collègues cartographes et validateurs, car votre travail doit être corrigé.
Jetez un œil à cette page web, où plusieurs bâtiments ont été corrigés pour correspondre à la réaement
lité.
Cordial
https://overpass-api.de/achavi/?changeset=176664808

Hello. Thanks for mapping.
A few remarks.
* Buildings should be mapped without snapping their corners to other buildings and features such as roads and paths.
* Buildings should have their corners squared.

Check the task instructions for the full requirements.
Keep that in mind at future mappings.
Keep on mapping!

Hello. Thanks for mapping here.
Please square each building you map by clicking the Q key while the object is still selected.

Best regards

Thanks for mapping

* Buildings should be mapped without snapping their corners to other buildings and features such as roads and paths.
Please keep that in mind at future mappings .
best regards

I mapped the overlooked buildings .
You mapped 18 buildings here. I added another 20.
Best regards

Hello. Thanks for mapping.
Please check better to locate buildings.
You overlooked quite a lot.
Best regards

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.

Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
In general, your mappings are far below the quality standards of HOTOSM
Issues found on your mappings

A: Inaccurate mapping.

B: Overlapping buildings.

D: Connecting nodes to other features. (buildings to highways. Serious error !

E: Buildings not squared or rounded.

Explanation can be found in this document which might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/176584889

Hello. Thanks for mapping on this project.
In general, accurately mapped. However,
You often collected multiple adjacent buildings and tagged them as 1 building.
This is not in line with the HOTOSM quality standards. Each building needs to be mapped individually.
I will adjust them to a single building. The balance still needs to be mapped.
Best regards

Hello. Thanks for mapping.
Your mappings are rather accurate.
However, 105 out of 109 buildings are not properly squared. Each building ought to be squared by pressing the Q key while still selected.
And... Buildings ought to be tagged as building=yes. Nothing else.
Keep that in mind at the next mapping session.
Best regards, and keep mapping

Hello. Thanks for mapping.
We welcome you as a new mapper.
Your mappings are accurate.
Please do not collect adjacent buildings and tag them as 1 building.
Best regards

Hello. Thanks for mapping.
I don't know how you managed this, but your mappings have an offset of 6 and 3 meters. Did you alter the offset in JOSM ?
Anyhow, I fixed them.
Best regards

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
Issues found on your mappings
A: Inaccurate mapping.
B: Overlapping buildings.
C: Collected adjacent buildings and mapped it as 1 building.
D: Connecting nodes to other features.
E: Buildings not squared or rounded.

Explanation can be found in this document, which might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/176334433

Hello. Thanks for mapping.
I commented on your mapping quality in another changeset.
Please do not include the shadow of buildings into a mapping as well.
Best regards

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
A: Inaccurate mapping.
B: Overlapping buildings.
C: Collected adjacent buildings and mapped it as 1 building.
E: Buildings not squared or rounded.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/176461329