OpenStreetMap logo OpenStreetMap

Changeset When Comment
61068607 about 4 years ago

The school building has several gap areas and roofs, it is not a good idea to just map them all as building.

way/308148209#map=19/40.54121/-75.39813

60164661 about 4 years ago

Please double check your edits with PEMA to avoid creating microfeatures with discernible offsets. Avoid using Bing at anytime.

way/601857310#map=19/40.54397/-75.40019

61068607 about 4 years ago

The speed hump/bump should be added as a node but not a way.

way/610907093#map=19/40.53700/-75.40054

33253414 about 4 years ago

The stop sign should be set at the stop line.

node/3690360803#map=19/38.99642/-76.89996

63804819 about 4 years ago

That's not a shelter.

All gas station canopies should be tagged as roof.

way/223782232/history#map=19/38.99648/-76.87984

108991912 about 4 years ago

Great Seneca Crk does not look like that,

way/969664619#map=16/39.1926/-77.2126

Source: USGS

111317285 about 4 years ago

Hi,

The road you added as Cochran Ave was removed since 2014 when the new building came up.

Several of your edits are completely nonsense and they cannot be verified.

112815955 about 4 years ago

In that morning I was passing by the area and heading south into PA. Town of Dickinson said that it was a temporary closure:

http://townofdickinson.com/news.aspx?zone=News&nID=1867

Weather condition was bad around the time because of raining. But it has been 5 days so I would hazard a guess that the construction had been done. As a result I've reopened the road.

112815955 about 4 years ago

Thanks for the comment. I was driving and only quickly closed the segment via my phone.

112922853 about 4 years ago

Thanks for checking it. To be honest I have no idea why this happened because 2 is not a valid option for communication type. I’m not even sure how this was added in iD.

I’ve removed it.

46928619 about 4 years ago

What bridge is that?

way/481040261/history#map=19/39.85574/-84.17382

106865457 about 4 years ago

The creek passing nearby does not have a name "Getz", please elaborate if possible.

106865457 about 4 years ago

This is not the correct way to add these features.

way/957707428#map=18/40.81355/-75.26840

82448693 about 4 years ago

I expanded a little bit, to avoid thinking of PlayStation Portable.

Are they present all the time?

110307411 about 4 years ago

That's not an utility pole.

node/9038964734#map=19/41.09534/-75.03119

112188491 about 4 years ago

Hi,

I don’t quite remember the details, but I probably searched “Condo” and applied. This building is definitely not for tourism so I’d say any tag with tourism is mostly incorrect. The tagging preset could be misleading.

I’ve changed it back.

44794586 about 4 years ago

That's not a post office. way/462850805#map=19/39.15376/-76.89971

110395778 about 4 years ago

What is this you added here? Please respond as soon as possible.

way/977437649/history#map=16/40.6239/-84.2568

111837748 about 4 years ago

As mentioned before, please consider using MD state wide 6 inch imagery to draw features (it does not show up in your changeset). Mapbox *does* provide higher resolution imagery but it is infamous for inconsistent offsets.

The building you added here has offset as well. You are recommended to draw the feature using Mapbox (if it is not dated) and then calibrate with MD statewide orthoimagery.

I've written a short diary to show you the difference: @DUGA/diary/397815

74732341 about 4 years ago

The building is now added.

changeset/74732341#map=19/39.52839/-76.13120