Hey M_Kucha,

I have fixed two copy/paste errors from this changeset;
- https://overpass-api.de/achavi/?changeset=130559862
- https://overpass-api.de/achavi/?changeset=2671320365

Regards,

Daniel

Left a note with possible POI details
note/3493675

Hey kylenz_linz,

One of the peaks you imported may or may not be a duplicate of Mount Erebus. There may be other such cases, but I have not checked this.

respectively
node/9099483080/history
and
node/515093744/history

Regards,

Daniel

Hey onelittlehelper,

Welcome back to OpenStreetMap. If you need any help to get started again, reach out to OSM Ireland over at
https://openstreetmap.community/?map=53.32403,-7.80553&zoom=5.77

Regards.

Daniel

Fyi, not important;

- For Saint Kieran's Street, there's also an old_name tagged.
way/26650837

- For The Parade, the historic name Castle Street is different from the other segment's current name Castle Road. Are/were they interchangable or not?

Be sure to check these other segments

William Street
- way/84151670

Chapel Lane
- way/177814380
- way/83864032

Poyntz Lane (tagged as old/historic name)
- way/840478376
- way/840478375

fyi for other users, changeset comment was meant to be:

changed site_type to #archaeological_site

Hallo Frontiersman,

node/302362940
Warum hast du leisure=fitness_station zu den Tunneln hinzugefügt?

Wenn es eine Fitness-Station gibt, füge sie bitte nicht zu einem anderen Objekt hinzu, siehe
osm.wiki/DE:Ein_Objekt,_ein_OSM-Element

Wenn du Änderungen vornimmst, sei vorsichtig, damit sie nicht an anderen Objekten hängen bleiben. Sie können dazu die "Alt"-Taste gedrückt halten, dann können Sie sich frei bewegen.

Mit freundlichen Grüßen,

Daniel

Hey Tilia_J,

Deze camping is nu verdeeld in twee vlakken zonder verschil in tags. Een is
way/1056231171
Ik denk dat dit vlak verwijderd of samengevoegd kan worden. Anders stel ik voor om bv. een "note" tag toe te voegen om het verschil of de nodige informatie aan te geven.

Je wijzigingen, ter informatie
https://overpass-api.de/achavi/?changeset=120387763

Groet,

Daniel

You should change it to place=islet

Based on your other changesets, you must've just forgotten to do this.

Hey kkrish11,

This change looks ok. Noteably though, it looks like the road may lead to an (underground) parking garage.
It may be useful to add the tag fixme=incomplete to the node at the end of the way to tell mappers the service way may continue from this point.

Regards,

Daniel

Hey kkrish11,

Simply removing the layer tag does not resolve the tagging issue here. We can see the way goes into a building and can even refer to street level imagery.
https://www.mapillary.com/app/?pKey=215810520051157&focus=photo

From here, we can make proper changes to the way. I would suggest splitting it where it intersects with the building, and adding covered=yes to the segment which is underneath the building.
You can then remove layer=-1 from this and all the adjacent segments.

Please do not make changes to incorrect tags when it does not resolve the tagging issue. This may be considered as mapping for the validator (there's still an issue, but it will no longer show up in validators.)

This changeset has been reverted here
changeset/129204376

Regards,

Daniel

Hey kkrish11,

Could you explain your changes, please? It looks like you created a redundant split in a way (no tag changes); it should route just fine as it was, besides the OSM model does not prohibit such loops.

Your changes
https://overpass-api.de/achavi/?changeset=129198493

Regards,

Daniel

@Mateusz Looks to be accidentally tagged while mapping
way/1101352021

V1 was created by Heinz_V, who split the administrative boundaries in what are supposedly the Tehsils, without further specifying any relations on, or deleting, the newly created ways
( https://en.wikipedia.org/wiki/Tehsil )
https://overpass-api.de/achavi/?changeset=73124217

Could you remove it and contact Heinz_V, please?
(Sidenote: iD will give a blocking warning when trying to save an empty way.)
Iirc India has opened up some of its data so it's likely the data can be filled in / replaced properly.

It's usually indicated with "survey" if it's recent.

I've re-added the values here
changeset/128659366

Hey shashp,

way/133257578/history
Based on Mapillary (2021), the vehicle restrictions you added do not seem to be explicitly signed.

Did you survey this location in person? If so, were they explicitly signed nearby?

Do these restrictions apply in both directions?

Do they apply only to the bridge or to more parts of the road?

Fyi, the value "no" is default for "motor_vehicle" on cycleways and similarly "yes" for residential.
Removed default, redundant values here
changeset/128611275
( https://overpass-api.de/achavi/?changeset=128611275 )
changeset/128611421
( https://overpass-api.de/achavi/?changeset=128611421 )

Learn more about Access
access=*

Your changes
https://overpass-api.de/achavi/?changeset=125720387

Regards,

Daniel

Hey David,

Is this explicitly signed?

What about the bridge going the other way? Have you been able to survey it?
way/396524128

Are there any "Must Exit" signs or similar before this part of the highway which tell cyclists to use the sidepath?

*and added gate
forgot to upload changes in between.

Fyi there's an existing bicycle parking, so be sure to adjust it to the current situation as needed.